Newentor Q6 Projection Alarm Clock Review: Time and Temperature on Your Ceiling
The Newentor Q6 projects time and temperature onto your ceiling or wall in red light — 180-degree adjustable, two brightness levels, works best in low-light conditions.
The Q6 is the right choice for a bedroom bedside clock where ceiling projection of time and temperature matters. It is not a replacement for a full weather station — it does not measure wind, rain, or UV, and its display is smaller than the Q3. If projection is not important to you, the Newentor Q3 offers a larger display with more weather data.
The Q6 sits at the intersection of alarm clock and weather station — a category that searches well because most bedroom clocks show time only, while most weather stations are too large for a bedside table. For the full Newentor lineup see our Newentor Q3 review and Newentor Q8 review.
Key Features at a Glance
Full Specifications
| Specification | Newentor Q6 |
|---|---|
| Primary feature | Ceiling/wall projection alarm clock with weather station |
| Projection angle | 180° adjustable arm |
| Projection colour | Red light |
| Projection brightness levels | 2 |
| What projects | Time + temperature (alternates indoor/outdoor) |
| Projection visibility | Best in low-light or dark — visible but less sharp in daylight |
| Indoor temp + humidity | ✓ Yes — shown on main display |
| Outdoor temp + humidity | ✓ Yes — via wireless sensor |
| Temperature accuracy | ±1°C (0°C–40°C range) · ±2°C outside this range per manual |
| Humidity accuracy | ±5% RH (40–80% range) · ±8% outside this range per manual |
| Weather forecast | ✓ Forecast icons on main display — window described as 8 to 24 hours per Newentor product page; verify in your unit’s manual |
| Barometric pressure display | ✓ Trend shown — varies by variant |
| Atomic time (WWVB) | ✓ 7 time zones: HST, AKST, PST, MST, CST, EST, AST (per North American Amazon listing — verify for your specific variant) |
| Automatic DST | ✗ No — must be set manually |
| Moon phase | ✗ No |
| Dual alarms + snooze | ✓ Yes |
| Display brightness levels | 4 adjustable |
| Remote sensors supported | Up to 3 (1 included) |
| Wireless range | Up to 200 ft (60m) in open air — real-world range lower with walls |
| Display power | AC adapter (included) + CR2032 battery for memory backup (time and settings) — verify whether projection operates on battery in your specific unit |
| Sensor power | 2× AA batteries (not included) |
| Wi-Fi / app | ✗ None |
| Wind / rain / UV | ✗ Not measured |
| Warranty | Per Newentor’s published policy — verify current terms |
Source: Newentor official product page, Amazon listing, and user manual — verified July 2026.
How the Projection Works
| What does the Q6 project? | Projected |
|---|---|
| Time | ✓ Yes |
| Outdoor temperature | ✓ Yes (alternates) |
| Indoor temperature | ✓ Yes (alternates) |
| Humidity | ✗ No |
| Weather forecast | ✗ No |
| Date | ✗ No |
| Humidity, forecast, date | Main display only |
The Q6’s projection arm is adjustable through 180 degrees, allowing you to aim the red light at either the ceiling directly above the bed or a wall to the side. There are two brightness levels — switched using the PROJECTION button — and the projection can be turned off entirely if you prefer the main display only.
What projects is time and temperature — alternating between time with indoor temperature for a few seconds, then time with outdoor temperature for a few seconds. The projection does not display humidity, forecast icons, or date. It is primarily designed so you can read the time and get a quick temperature check without turning on a light or picking up a phone.
The Q6 requires a CR2032 battery — included — which typically preserves time settings and alarm memory during power outages. Whether the projection itself functions on CR2032 alone varies between units and firmware versions — verify this in your specific unit’s manual before relying on projection during outages. The main display requires AC power for full functionality.
Newentor Q6 vs Q3 — Which Should You Buy?
These two stations are frequently compared because they appear together in Amazon bundles and serve similar indoor settings. The difference comes down to primary use case.
| Feature | Q6 | Q3 |
|---|---|---|
| Ceiling/wall projection | ✓ Yes | ✗ No |
| Display size | Smaller | 7.5 inches |
| Moon phase | ✗ No | ✓ Yes |
| Automatic DST | ✗ Manual only | ✓ Auto |
| Weather forecast | ✓ Yes | ✓ Yes |
| Best placement | Bedside table | Kitchen / desk |
| Primary use case | Projection bedroom clock | Full weather station |
Pros and Cons
- 180° adjustable projection — ceiling or wall, two brightness levels
- Shows indoor and outdoor temperature, humidity, and forecast on main display
- WWVB atomic time across 7 time zones
- Dual alarms with snooze — useful for households with different wake times
- Supports up to 3 outdoor sensors for multi-zone monitoring
- 4 display brightness levels — adjustable for night use
- AC power with battery backup — clock continues during brief outages
- Weather forecast icons on main display — a step up from basic projection clocks
- Projection alternates indoor/outdoor temp — not simultaneously displayed
- DST must be set manually — no automatic adjustment
- Projection is less readable in bright daylight conditions
- No moon phase display
- No Wi-Fi, no app, no remote monitoring
- No wind, rain, or UV measurement
- Display smaller than the Q3 — harder to read from across a room
Who Should Buy the Newentor Q6
- You want to check the time and temperature from bed without turning on a light or reaching for your phone
- A bedside clock with genuine outdoor temperature monitoring matters more than a large weather display
- Dual alarms are useful — the Q6 supports separate weekday and weekend wake times
- You want WWVB atomic time accuracy in a bedroom clock format
- Multi-zone sensor support is useful — up to 3 sensors for bedroom, outdoor, and another location
- You want to see the time and outdoor temperature projected simultaneously — the Q6 alternates between them
- Automatic DST adjustment is important — the Q6 requires manual DST setting
- You want a large weather station display readable from across a room — consider the Q3
- Moon phase, wind data, or app connectivity matter to you
- You primarily use the projection in a bright room during the day
Check Current Price
180° adjustable projection · Red light · Indoor/outdoor temp + humidity · Forecast · WWVB atomic time · Dual alarms · 3-sensor support
Frequently Asked Questions
Does the Newentor Q6 show outdoor temperature on the ceiling?
Yes, but not simultaneously with indoor temperature. The projection alternates between time with indoor temperature and time with outdoor temperature every few seconds. Both are visible on the main display at the same time — the projection shows only one at a time.
Does the Newentor Q6 have automatic daylight saving time?
No. Unlike the Newentor Q3, the Q6 does not automatically adjust for daylight saving time — DST must be set manually. The WWVB atomic signal handles time synchronisation automatically, but the DST offset requires manual entry.
How does the Newentor Q6 projection work?
The Q6 has a 180-degree adjustable projection arm. Press the PROJECTION button to turn it on or off and switch between two brightness levels. The red light projection displays time and temperature alternately on ceiling or wall. It works best in low-light or dark conditions — visible during daytime but less sharp in bright rooms.
What is the difference between the Newentor Q6 and Q3?
The Q3 is a 7.5-inch colour weather station with barometric forecast, moon phase, automatic DST, and a large display for a kitchen or desk. The Q6 is a projection alarm clock with a smaller display — its defining feature is projecting time and temperature onto the ceiling or wall. The Q6 suits bedside use; the Q3 suits a larger display location.
Related Newentor pages
Community Feedback
Community observations are summarised from verified owner reports across major retailers and weather enthusiast communities. The projection feature receives consistent positive mention for bedroom use — particularly the ability to check the time and temperature without disturbing a sleeping partner. One of the most commonly reported limitations is the discovery that the projection alternates between indoor and outdoor temperature rather than showing both simultaneously — this page addresses that clearly upfront. The manual DST adjustment is the second most frequently mentioned limitation. This station has not been personally tested by this site — this is disclosed clearly, and our analysis is based on manufacturer documentation and owner feedback.
Lena Thornton
Weather Station Analyst & CWOP Contributor. Lena researched, reviewed and analysed the Newentor Q6 using official Newentor documentation, Amazon product data, and owner feedback. Updated July 2026.
